Smoky Mountain Model Works, Inc.
Asheville, North Carolina • USA
Creating 20th Century Models Using 21st Century Technology
Smoky Mountain Model Works, Inc. • Asheville, NC 28805
Ph.:  (828) 777-5619  (10-5 M-F) • Email: jimking3@charter.net
Sn2 Passenger & Freight Trucks
All trucks are printed in resin at the thinnest layer thickness possible as a single piece, including outside hung brake shoes and beams.  HOn3 wheelsets (optional), coil springs on J&S truck, and #0-48 screw are Kadee products. 

Russel 36" Wheelbase Truck Kit (Sn2)

Introduced in March 2025, this common logging style truck is suitable for non-Maine freight equipment.

Maine Two-Foot Truck Kits (Sn2)
First introduced in 2007 ("Common" and "Swing Motion" freight trucks) and 2010 (Jackson & Sharp Co. truck), these kits were redesigned in September 2020 to combine many small, cast urethane pieces into larger subassemblies that were 3D-SLA printed.  In October 2023, all three trucks were redesigned as a single, resin-printed part including the end beams.  The J&S truck also includes the characteristic "comma shaped" strap springs.
Kit No. 64n-TK-Russel 3D, 2 trucks ... $21
Kit No. 64n-TK-Russel 3Dx (no wheelsets) ... $20

Kit No. 64n-TK-J&S 3D (J&S Passenger Truck), 2 trucks ... $23
Kit No. 64n-TK-J&S 3Dx (no wheelsets) ... $20
(Kadee #637 coil springs are cosmetic and included in both options)


Kit No. 64n-TK-Common 3D (Common Style (visible single spring)), 2 trucks ... $21
Kit No. 64n-TK-Common 3Dx (no wheelsets) ... $18


Kit No. 64n-TK-Swing 3D (Swing Motion Style (no visible spring)),
2 trucks ... $22
Kit No. 64n-TK-Swing 3Dx (no wheelsets) ... $18