Smoky Mountain Model Works, Inc.
Asheville, North Carolina • USA
Creating 20th Century Models Using 21st Century Technology
Smoky Mountain Model Works, Inc. • 35 Springwood Drive • Asheville, NC 28805
Ph.:  (828) 777-5619  (10-5 M-F) • Email: jimking3@charter.net
Each item is designed in 3D CAD.  Urethane casting patterns are made using Rapid Prototyping technology.
S Scale Trackside Details
BETHLEHEM 53A & 53B SWITCH STAND KITS
The 53A and 53B kits consist of a single, 3D printed body, throw arm and counterweight PLUS white- and red-tinted urethane targets and a length of Phosphor Bronze wire to create the target spindle and connection to switch point.

NOTE:  throw arm and counterweight are available in LEFT HAND and RIGHT HAND orientation; they cannot be repositioned and do not operate.

These are "functional" details, meaning you can link the targets to switch throw bar to allow targets to rotate 90 degrees.

Switch stands
DO NOT operate your switch ... they are operated BY your switch if you connect the throwbar to the cast urethane link.

Targets require
** NO PAINTING ** ... they are cast in red- and white-tinted urethane.  Base & target spindle (wire) require painting.

53A (low-profile) includes (5) target styles & instructions
53B ("intermediate" height) includes (4) target styles & instructions

64-TD-1.1-LH ... 53A ... LEFT HAND ARM ... $6.50
64-TD-1.3-LH ... 53A ... 3-pack ... $17.50

64-TD-1.1-RH ... 53A ... RIGHT HAND ARM ... $6.50
64-TD-1.3-RH ... 53A ... 3-pack ... $17.50

64-TD-2.1-LH ... 53B ... LEFT HAND ARM ... $8.00
64-TD-2.3-LH ... 53B ... 3-pack ... $22.00

64-TD-2.1-RH ... 53B ... RIGHT HAND ARM ... $8.00
64-TD-2.3-RH ... 53B ... 3-pack ... $22.00
PHONE BOX KITS
The phone box, also named "call box", was a key ingredient in the communication system between crews and dispatchers/operators.  A box would be "planted" on posts or bolted to phone poles in strategic locations, such as diamonds, branchline junctions, interchanges and congested areas.  Remote areas with few depots also used these.  They were
EVERYWHERE!

Each kit includes a 3D printed body with all braces, a 2-pc cast urethane roof and length of chain.  The post is not included but can easily be modeled with a short length of Code 70 rail.

64-TD-40 ... $9.95